Detailed tie dye patterns tutorial, First introduction to tie dye

Tie dye patterns, as the name suggests, “tie” and “dye”. It refers to the process of printing and dyeing patterns on fabrics using knotting (or sewing) and dip-dying techniques. It usually also refers to the printing and dyeing handicrafts times.

Tie-dye has a long history. Traditional tie-dye art originated in the India and China. The earliest existing tie-dye products come from Xinjiang. According to records, as early as the Eastern Jin Dynasty, knotted and anti-dyed twisted valerian silk had been produced in large quantities. Works from the Eastern Jin Dynasty in 408 AD. The craft of tie-dye had been mature as early as the Eastern Jin Dynasty and was a privileged product representing the nobility.

Tie-dye can create patterns by folding, sewing, binding, twisting, clamping, compressing, etc., and after the dyeing is completed and before the stitches are removed, all the results are unknown, a bit like the surprise of opening a blind box.

Although natural indigo dye has a bit of a smell, it still cannot stop this art from exuding its own unique charm. It’s just that ventilation needs to be maintained during the production process, and the home needs to be protected to avoid accidental dyeing.

For indigo dye, you can use natural indigo, or you can buy an indigo dyeing set (available on the universal Taobao), and the effect is almost the same. Like all dyeing, the fabric must be completely natural. Homespun is the first choice, followed by cotton, silk, linen, etc.

Introductory tie dye pattern

There are many ways to tie and tie flowers in tie-dye. Simple patterns can be supplemented by tools, such as G-clips, wooden clips, rubber bands, etc. to construct patterns. Complex tie-dye patterns are mainly stitched and sewn by hand. Tie combination. Today I will introduce some simple entry-level tie-dye techniques.

Tie dye DIY steps

1. Pre-wash the fabric.

In almost all dyeing tutorials, it is recommend to pre-wash the fabric before dyeing. You can rinse it directly with water or use a mild detergent to remove all debris and chemicals and allow the dye to bind to the fabric. is better and achieves better dyeing results.

2. After washing, let the fabric dry naturally and set aside.

For tie-dye patterns, look for materials you can find, such as clips, rubber bands, wooden boards, etc., and then tie the fabric into the way you want according to your own ideas, but it must be dense.

3. Wet the plant

. Put the wrapped fabric into clean water and let the fabric be thoroughly moisten.

4. Make the dye.

Mix the indigo dye and water according to the proportion and stir slowly to avoid inhaling more oxygen and allow the indigo dye to fully oxidize. After stirring, add a lid and let the dye stand for 30-60 minutes.

5. Start dyeing.

Take the fabric out of the water, squeeze out excess water, then put it into the dyeing liquid and let it sit for 5-15 minutes. The length of time depends on the depth of dyeing you want and the tightness of the tie pattern. If the color needs to be darker, soak it for a while longer. If there are more flowers, you can also soak it for a while longer.

Once you feel that the color is enough during the oxidation process, take the fabric out of the dye bath and let the fabric combine with the air. After a few minutes, your fabric will slowly turn from green to blue. Don’t worry, your black experiment is not. Failure, this discoloration process is a naturally occurring oxidation effect. Generally, for better color and color fixation, dyeing can be carry out three times. Of course, the color of the fabric can also be observe. The more times the steps are repeat, the darker the blue color will be. After the dyeing and oxidation of the fabric are complete, you can leave it overnight, then rinse it in clean water to remove excess color, and dry it again. Be careful to wear gloves, otherwise your hands will turn into little Smurf hands.